How to Open Fuse Box on 2018 Jeep Compass?

Are you ready to uncover the secrets hidden within your 2018 Jeep Compass?

Delve into the world under the driver’s side knee panel, where a mysterious fuse box lies waiting to be unlocked.

With a few twists and pops, the path to power control will reveal itself.

Let’s embark on this electrifying journey together!

how to open fuse box on 2018 jeep compass

To open the fuse box on a 2018 Jeep Compass, located under the driver’s side knee panel, follow these steps:

1.

Remove the knee panel by opening the door and popping off the side panel.

2.

Unscrew the screws at the side and bottom of the knee panel.

3.

The panel is held in place with plastic clips.

4.

Once the panel is loose, unplug the headlight switch.

Key Points:

• Locate the fuse box under the driver’s side knee panel on a 2018 Jeep Compass
• Remove the knee panel by popping off the side panel after opening the door
• Unscrew the screws at the side and bottom of the knee panel
• The panel is held in place with plastic clips
• Once loose, unplug the headlight switch from the panel

Check this out:

1. Locate The Fuse Box

The first step in opening the fuse box on a 2018 Jeep Compass is to locate its position. In this particular model, the fuse box is situated under the driver’s side knee panel. This makes it accessible to the driver for easy troubleshooting and maintenance. The location under the knee panel means that some disassembly of the interior trim is typically required to access the fuses.

• Locate the position of the fuse box
• Situated under the driver’s side knee panel
• Accessible for troubleshooting and maintenance
• Disassembly of interior trim may be required.

2. Prepare The Area

• Before opening the fuse box, it’s crucial to prepare the area for a smooth and efficient operation.
• Ensure your vehicle is parked in a safe and stable location.
• Switch off the engine and remove the key from the ignition.
• Wearing protective gloves is recommended to prevent injuries or hand damage.
• Gather the necessary tools, such as a screwdriver, to have everything you need at hand.

3. Remove The Knee Panel

• To access the fuse box on the 2018 Jeep Compass, you’ll need to remove the knee panel where it is located.
• Start by locating the panel under the driver’s side dashboard.
• Carefully remove any covers or trim pieces that may be concealing the screws or clips holding the knee panel in place.
• Using the appropriate tools, such as a screwdriver, carefully loosen and remove the screws securing the knee panel.
• Keep track of the screws to avoid losing them during the process.

4. Open The Door

Once the knee panel is removed, open the driver’s side door to provide better access to the fuse box area.

This step allows for:

• More room to work and maneuver as you progress through the process of accessing the fuses.
• Proper lighting and ventilation, making the task of locating and inspecting the fuses easier and more comfortable.

Ensure to open the driver’s side door for enhanced accessibility and comfort while working on accessing the fuses.

5. Pop Off The Side Panel

Next, to access the fuse box located adjacent to the knee panel, start by removing the side panel. This panel could be secured in place with either clips or screws that require careful removal. Gradually detach the side panel from the dashboard using a trim removal tool or your hands, ensuring a gentle approach. Take your time and proceed systematically to prevent any harm to the panel or nearby components. After successfully detaching the side panel, remember to store it safely.

• Remove the side panel adjacent to the knee panel.
• Use a trim removal tool or your hands to detach the panel carefully.
• Store the detached side panel in a safe location.

Always handle the panels and components with caution to avoid causing any damage.

6. Remove Screws

After removing the side panel, look for any screws securing the knee panel at the bottom and sides. Use the appropriate screwdriver to carefully remove these screws without damaging the threads or surrounding trim pieces. Keep the screws organized and in a secure place to ensure they are not lost during the process. Removing these screws is crucial in disassembling the knee panel and gaining access to the fuse box underneath.

• Look for screws securing the knee panel
• Use appropriate screwdriver
• Keep screws organized
• Access the fuse box underneath

Always handle the screws carefully to avoid losing them during the disassembly process.

7. Release Plastic Clips

• In addition to screws, the knee panel of the 2018 Jeep Compass may also be held in place with plastic clips.
• To release these clips, gently pry the panel away from the dashboard using a trim removal tool or your fingers.
• Work your way around the perimeter of the panel, carefully releasing each clip to avoid breakage.
• Take your time during this step to prevent any damage to the panel or the clips, as they are essential for reassembly later on.

8. Loosen The Panel

• With the screws and plastic clips removed, the knee panel should begin to loosen from its position under the driver’s side dashboard.
• Apply gentle pressure and maneuver the panel to free it from any remaining clips or attachments.
• Take care not to force the panel, as this may cause damage to the interior trim or surrounding components.
• Once the panel is loose, set it aside in a safe location where it won’t be accidentally damaged.

9. Unplug Headlight Switch

Before fully removing the knee panel to access the fuse box on the 2018 Jeep Compass, you’ll need to unplug the headlight switch that may be connected to the panel. Locate the connector attached to the headlight switch and carefully disconnect it by pressing the release tab and pulling the connector straight out. Take note of how the connector is oriented to facilitate easy reconnection later. Once the headlight switch is unplugged, you can set the knee panel aside to reveal the fuse box underneath.

10. Access The Fuse Box

• With the knee panel removed and the headlight switch unplugged, you can now easily access the fuse box located under the driver’s side dashboard of the 2018 Jeep Compass.
• Take caution when handling the fuses, ensuring that the vehicle’s power is turned off to avoid any electrical mishaps.
• Use a fuse puller or a pair of needle-nose pliers to carefully remove and inspect any fuses that may be faulty or in need of replacement.
• Take your time to troubleshoot and address any issues before reassembling the components in reverse order.

FAQ

How do you open a fuse block?

To access the fuse block, locate the notch on the lid of the fuse box. With your finger, gently pull the lid towards you to disengage it from its hinges. Once the lid is released, carefully lift it out to open the fuse block and access the fuses inside.

Is there an interior fuse box in Jeep?

In Jeep vehicles, the fuse box is not located within the interior of the car. Instead, all of the fuses can be found in a box situated near the windshield on the passenger side of the engine compartment. If you have auxiliary switches, you may also notice a constant and switched 12-volt wire, along with four auxiliary wires under the dash on the passenger side footwell. This setup ensures easy access to the fuses and wiring components for maintenance purposes, without cluttering the interior of the Jeep with a separate fuse panel.

How do you get to the interior fuse box?

To access the interior fuse box in most vehicles, you will typically locate it on the driver’s side dashboard or below the glove box. It’s a good idea to check these spots first. However, if you can’t find it there, don’t forget to also explore the possibility of it being located in the luggage compartment. Each manufacturer may have their unique placement for the interior fuse box, but these are the common areas to start your search.

How do you find a hidden fuse box?

To locate a hidden fuse box, start by inspecting the walls for a metal box with a protective door. Be sure to check places like the garage, storage room, utility room, basement, and hallways, as these are common locations for circuit breakers or fuse boxes to be tucked away. Look for a metal panel flush with the wall and with a hinged door securing the breakers or fuses inside. Remember to explore these different areas thoroughly to uncover the hidden fuse box in your home.

Sources: 1, 2, 3, 4