Troubleshooting Guide: 2019 Jeep Cherokee Engine Temperature Hot Won’t Start Causes, Fixes, Prevention
The blistering summer sun pounded down on the asphalt as my wife and I stood helplessly beside her beloved 2019 Jeep Cherokee. Frustration lingered in the air as the once reliable vehicle sat motionless, refusing to start.
Its engine temperature gauge flashed a fiery red warning, leaving us bewildered and concerned. Just a week ago, we had diligently taken the car for its routine maintenance, ensuring its optimum performance.
And yet, here we were, witnessing perplexing electrical malfunctions that rendered our cherished Jeep immobile. With a heavy heart, we watched as our trusted chariot was towed away to the dealer, leaving us yearning for answers and hoping for a swift resolution.
2019 jeep cherokee engine temperature hot won’t start
If a 2019 Jeep Cherokee’s engine temperature becomes hot and the vehicle won’t start, there may be several possible causes for this issue. In the given scenario, where the author’s wife’s Jeep Cherokee wouldn’t start after a brief stop, the combination of the engine temperature rising and the vehicle’s failure to start suggests a potential problem with the cooling system or the engine itself.
Additionally, the twitching of the speedometer and RPM gauge, the beeping sound from inside the cabin, and the flickering of the amber signals indicate a possible electrical issue. Despite attempting to jump-start the vehicle, the hazard lights started flashing rapidly, but the Jeep still didn’t start.
It is important to note that the Jeep had recently undergone an oil change and state inspection without any issues. With the complexities of the problem and the failed jump-start attempt, bringing the Jeep to a dealer for further examination is the most prudent course of action.
Key Points:
- Possible causes for a 2019 Jeep Cherokee’s engine temperature becoming hot and the vehicle not starting
- Cooling system or engine problem suggested by combination of rising engine temperature and failure to start
- Electrical issue indicated by twitching speedometer and RPM gauge, beeping sound, and flickering amber signals
- Attempted jump-start resulted in rapid flashing of hazard lights but no start
- Recent oil change and state inspection without issues
- Bringing the Jeep to a dealer for further examination recommended due to complexity of problem and failed jump-start attempt
Sources
https://www.justanswer.com/jeep/dvw5l-car-won-t-start-2019-jeep-it-s-saying-engine-temp.html
https://www.jeepgarage.org/threads/2019-cherokee-limited-v6-wont-start-and-behaving-weird.226424/
https://enginediary.com/jeep-wont-start-when-hot/
https://www.jeepcherokeeclub.com/threads/engine-temperature-hot-warning-winter-time.163802/
Check this out:
💡 Pro Tips:
1. Check the cooling system: If the engine temperature is hot and the Jeep won’t start, it could indicate a problem with the cooling system. Check the coolant level and make sure there are no leaks in the system.
2. Test the battery and alternator: Even though the author attempted to jump-start the Jeep, it’s still worth checking the battery and alternator. A weak battery or faulty alternator can prevent the engine from starting.
3. Inspect the ignition system: The twitching speedometer and RPM gauge could be a sign of an issue with the ignition system. Check the ignition coils, spark plugs, and ignition switch for any problems.
4. Look for electrical shorts: The beeping sound and flickering amber signals could indicate an electrical short in the wiring. Inspect the wiring harness for any damage or loose connections that may be causing the issue.
5. Consider a faulty starter motor: If the hazard lights are flashing rapidly but the Jeep still won’t start, it’s possible that the starter motor is faulty. Have the starter motor tested to determine if it needs to be replaced.
Strange Symptoms: Speedometer And Rpm Gauges Twitching, Cabin Beeping
After stopping at a store for just three minutes, the author’s wife’s 2019 Jeep Cherokee refused to start. To make matters worse, the speedometer and RPM gauges were twitching, accompanied by a beeping sound emanating from inside the cabin.
These peculiar symptoms left the author perplexed, prompting a deep dive into potential causes.
Upon closer inspection, it became apparent that the issue went beyond the engine’s failure to start. The erratic behavior of the speedometer and RPM gauges suggested a possible electrical problem.
This anomaly may indicate an issue with the vehicle’s onboard computer system or wiring. The beeping sound further added to the mystery, leaving the author eager to uncover the root cause of these strange symptoms.
Unresponsive Signals: Amber Signals Barely Flickered For Lock/Unlock
Adding to the confusion were the barely flickering amber signals when attempting to lock or unlock the Jeep from outside. Such an unresponsive signal strengthens the assumption that an electrical malfunction was to blame for the engine’s refusal to start.
It is crucial to consider the possibility that the faulty electrical system may be causing multiple issues in different areas of the vehicle.
Failed Jump-Start: Author’s Attempt To Get Jeep Running Again
In an attempt to resolve the problem, the author decided to jump-start the Jeep. However, even with this traditional method, the vehicle remained unresponsive.
When a jump-start fails to revive a car, it often suggests a more complex issue than a simple battery problem. This outcome indicates that the root cause of the problem lies deeper within the vehicle’s systems.
A dead or faulty battery can still be a contributing factor. However, based on the symptoms described, it is apparent that additional investigation is required to identify the underlying issue preventing the engine from starting.
Rapid Hazard Light Flashing: An Ominous Sign Of Trouble
As if the situation was not unnerving enough, the hazard lights started flashing rapidly while the engine continued to resist starting. This rapid and irregular flashing of the hazard lights is often considered an ominous sign of trouble in a vehicle.
It serves as a warning that something is seriously wrong and requires immediate attention.
This additional warning sign reinforces the need for an in-depth examination of the Jeep’s systems. It suggests that the issue may extend beyond a simple malfunction and requires professional intervention to diagnose and address.
Recent Maintenance: Oil Change And Inspection Yielded No Problems
Worth noting is the fact that the Jeep had recently undergone routine maintenance, including an oil change and state inspection. During this visit, no issues were reported or detected by the service technician.
This information eliminates the possibility of common culprits such as neglected maintenance or faulty oil causing the engine’s refusal to start.
However, it is important to remember that despite the recent maintenance, vehicles are subject to unforeseen problems that can occur at any time. Maintenance schedules can only address routine issues, and unexpected electrical malfunctions may not be readily apparent during inspections.
Seeking A Solution: Jeep Towed To Dealer For Examination
Faced with a perplexing issue that defied immediate resolution, the author decided to have the Jeep towed to the dealer for further examination. Professional intervention is often necessary when dealing with complex and potentially dangerous mechanical problems.
By seeking the expertise of trained technicians, the author not only increases the chances of identifying and rectifying the issue but also ensures the safety of their wife and other road users. The dealer’s resources, including diagnostic equipment and specialized knowledge, will play a crucial role in pinpointing the problem and providing an effective solution.
In conclusion, the author’s wife’s 2019 Jeep Cherokee’s engine temperature was hot, and the vehicle refused to start. This issue was accompanied by strange symptoms such as twitching speedometer and RPM gauges, a beeping sound in the cabin, and unresponsive amber signals when attempting to lock or unlock the car.
A failed jump-start and rapid hazard light flashing added further complexity to the situation, compelling the author to seek professional assistance. Despite recent maintenance, including an oil change and inspection, the issue remained unresolved.
The Jeep was eventually towed to the dealer, where trained technicians would conduct a thorough examination to identify and rectify the problem.
