2018 Jeep Compass Interior Fuse Box Location: Where is it?

Curious about the hidden secrets of your 2018 Jeep Compass?

Delve into the intriguing world of the interior fuse box location.

Uncover the mysteries lurking beneath the driver’s side knee panel, waiting to be unveiled with each unscrew and unclip.

Let’s embark on an adventure of discovery within the confines of plastic clips and fuse diagrams!

2018 jeep compass interior fuse box location

The interior fuse box location for the 2018 Jeep Compass is under the driver’s side knee panel.

To access it, you need to remove the knee panel by pulling it from under the steering wheel gap, popping off the side panel, unscrewing a couple of screws, unclipping plastic clips, and unplugging the headlight switch.

The fuse box diagram is not included in the owner’s manual, but it matches the fuse numbering listed in the manual.

Key Points:

• 2018 Jeep Compass interior fuse box location is under the driver’s side knee panel.
• Accessing the fuse box requires removing the knee panel by pulling it from under the steering wheel gap, popping off the side panel, unscrewing screws, unclipping plastic clips, and unplugging the headlight switch.
• Fuse box diagram is not included in the owner’s manual.
• Fuse numbering in the manual matches that in the fuse box.
• Location allows for easy access for driver to check and replace fuses.
• Fuse box is conveniently located for quick troubleshooting and maintenance.

Check this out:

Introduction To 2018 Jeep Compass Fuse Box Location

The 2018 Jeep Compass is a popular compact SUV recognized for its off-road capabilities and stylish design. Like any vehicle, the Jeep Compass is equipped with a fuse box that houses the fuses for various electrical components in the car. Understanding the location of the interior fuse box is crucial in case you need to replace a fuse or troubleshoot electrical issues. In the 2018 Jeep Compass, the interior fuse box is located under the driver’s side knee panel, requiring a few steps to access it properly.

Underneath The Driver’s Side Knee Panel

To access the interior fuse box in the 2018 Jeep Compass, you need to locate the driver’s side knee panel. This panel is situated under the steering wheel, near the driver’s left knee when seated in the driver’s seat. The interior fuse box is hidden behind this panel and is not immediately visible when you enter the vehicle. Removing the knee panel is the first step in gaining access to the fuse box and its contents.

• Locate the driver’s side knee panel under the steering wheel
• Remove the knee panel to access the interior fuse box and its contents.

Steps To Accessing The Fuse Box

Accessing the interior fuse box in the 2018 Jeep Compass involves a few steps to ensure proper removal and reinstallation of the necessary components. To begin, you must:

• Remove the knee panel, followed by popping off the side panel located next to it.
• Unscrew a couple of screws that secure the knee panel in place.
• Unclip the plastic clips to fully remove the knee panel and reveal the interior fuse box.

Remember to follow these steps carefully to access the interior fuse box in the 2018 Jeep Compass.

Removing The Knee Panel

• The knee panel in the 2018 Jeep Compass is secured with plastic clips and screws.
• To remove the knee panel, carefully pull it from beneath the steering wheel gap to avoid causing any damage.
• The knee panel provides access to the interior fuse box, allowing for easy checking and replacement of fuses as necessary.

Popping Off The Side Panel

In addition to removing the knee panel, it is important to also remove the side panel located next to it. This panel may be secured with plastic clips or screws, so handle it delicately to prevent damage. Removing the side panel is crucial for full access to the interior fuse box and ensuring the proper maintenance of the vehicle’s electrical system.

• Handle the side panel with care to prevent damage
• Side panel removal is necessary for full access to the interior fuse box

Unscrewing Necessary Screws

• To access the interior fuse box in the 2018 Jeep Compass, you must unscrew the screws securing the knee panel.
• Locate and unscrew the screws around the panel following the guidelines in the vehicle’s manual or seek professional assistance.
• Properly unscrewing these screws is crucial for safely removing the knee panel and accessing the fuse box.

Unclipping The Plastic Clips

• Along with unscrewing the necessary screws, you will also need to unclip plastic clips that secure the knee panel and side panel in place.
• These clips are designed to hold the panels securely but can be easily unclipped with the right tools or techniques.
• Carefully unclipping the plastic clips will allow you to remove the panels without causing any damage to the surrounding components.

Unplugging The Headlight Switch

• Once the knee panel is loose and ready to be removed, you will need to unplug the headlight switch to fully access the interior fuse box.
• The headlight switch is typically connected to the knee panel and needs to be unplugged before the panel can be completely taken out.
• Ensure you unplug the headlight switch carefully to avoid any damage to the switch or its connections.

Fuse Box Diagram And Owner’s Manual

• The owner’s manual for the 2018 Jeep Compass does not include a diagram of the interior fuse box.
• However, the fuse numbering listed in the manual matches the arrangement of fuses in the actual fuse box.
• You can refer to the fuse numbering in the manual to identify specific fuses in the interior fuse box.
• Understanding the fuse box layout and the functions of each fuse is essential for proper maintenance and troubleshooting of electrical issues in your vehicle.

FAQ

Is there an interior fuse box in Jeep?

In Jeep vehicles, there is no interior fuse box. Instead, all the fuses are housed in a box located near the windshield on the passenger side of the engine compartment. This design choice centralizes the fuses for easier access and maintenance. Additionally, if you have auxiliary switches, there are specific wires located under the dash on the passenger side foot well to accommodate them, providing convenient access for customization and additional accessories installation.

How do you get to the interior fuse box?

To access the interior fuse box of your vehicle, start by locating the dashboard on the driver’s side. Look for a panel that can be easily removed to reveal the fuse box. If you don’t find it there, check below the glove box as some manufacturers place it in that area. If it’s still not there, another place to look for the interior fuse box is in the luggage compartment. Be sure to check these locations thoroughly to locate the interior fuse box in your vehicle.

Where is the radio fuse on a 2018 Jeep Compass?

The radio fuse on a 2018 Jeep Compass is located underneath the dash on the driver’s side, specifically fuse F36. If you’re experiencing issues with the radio, checking this fuse would be a good place to start troubleshooting. If the fuse appears to be fine, another potential solution is to perform a battery disconnect for approximately 15 minutes to see if resetting the system resolves the problem.

How do you find a hidden fuse box?

To find a hidden fuse box, start by looking for a metal box that is flush with the wall and has a metal door. Check areas like the garage, storage room, utility room, basement, or hallway where the fuse box could be hidden. Be thorough in your search and look for any inconspicuous metal doors that could lead to the circuit breaker or fuse box.

Sources: 1, 2, 3, 4