How to Reset Jeep Wrangler Oil Life Indicator?
Are you tired of that pesky “Oil Life” indicator on your Jeep Wrangler constantly reminding you to get an oil change?
Well, fret no more!
In this article, we will take a look at the various methods you can use to reset the oil life on your trusty Jeep.
Say goodbye to that nagging reminder and say hello to a smooth ride!
how to reset jeep wrangler oil life
To reset the oil life on a Jeep Wrangler, there are a couple of ways you can do it.
The first method is to push and release the ENGINE START/STOP button without pressing the brake pedal, then turn the ignition to the ON/RUN position (do not start the engine).
From there, navigate to the Oil Life submenu in Vehicle Info on the instrument cluster display.
Hold down the OK button until the gauge resets to 100%.
Another method is to push and release the ENGINE START/STOP button without pressing the brake pedal, then turn the ignition to the ON/RUN position (do not start the engine).
Next, fully press the accelerator pedal, slowly, three times within ten seconds.
Finally, push and release the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position.
If the indicator message illuminates when starting the vehicle, it means that the oil change indicator system did not reset, and you may need to repeat the procedure.
Key Points:
- Two methods to reset the oil life on a Jeep Wrangler
- Method 1:
- Push and release ENGINE START/STOP button
- Turn ignition to ON/RUN position
- Navigate to Oil Life submenu
- Hold down OK button until gauge resets to 100%
- Method 2:
- Push and release ENGINE START/STOP button
- Turn ignition to ON/RUN position
- Fully press accelerator pedal three times within ten seconds
- Push and release ENGINE START/STOP button to return ignition to OFF/LOCK position
- Indicator message may illuminate if oil change indicator system did not reset
- Repeat the procedure if indicator message illuminates
Check this out:
💡 Did You Know?
1. The Jeep Wrangler’s oil life reset process involves a secret combination on the vehicle’s steering wheel controls. To reset the oil life, you need to simultaneously press and hold the “OK” button and the “Up” arrow button until the display shows “Reset.”
2. Did you know that the oil monitoring system in Jeep Wrangler JK models (2007-2018) can actually detect your driving habits and adjust the oil change interval accordingly? So, if you drive more aggressively, the system will recommend an oil change sooner than if you have a more relaxed driving style.
3. The oil change interval for a Jeep Wrangler varies depending on the model year and engine type. However, on average, it is recommended to change the oil every 3,000 to 5,000 miles or once every six months, whichever comes first.
4. Jeep Wrangler JL models (2018-present) introduced an innovative feature called the “Oil Degradation Sensor,” which can analyze the condition of the oil and determine if it needs changing. The sensor measures various factors such as oil quality, temperature, and engine load to provide accurate oil change recommendations.
5. For those who prefer off-roading with their Wrangler, it’s important to note that frequent and extreme off-road use can impact the oil life. Factors such as dust, dirt, water crossings, and excessive engine strain can decrease the oil’s effectiveness, potentially requiring more frequent oil changes to maintain optimal performance.
1. Method 1: Resetting Without The Brake Pedal
Resetting the oil life on your Jeep Wrangler is a simple process that can be done without even touching the brake pedal. Follow these steps to reset the oil life using this method.
2. Step 1: Press And Release The Engine Start/Stop Button
To begin the process, ensure that your Jeep Wrangler is turned off. Without pushing the brake pedal, push and release the ENGINE START/STOP button to turn the ignition to the ON/RUN position. It is important not to start the engine at this stage.
3. Step 2: Navigate To Oil Life Submenu In Vehicle Info
Once the ignition is in the ON/RUN position, locate the vehicle information display on your instrument cluster. Use the controls to navigate to the Oil Life submenu. This can usually be found within the Vehicle Info section.
4. Step 3: Hold The Ok Button
To reset the oil life on your Jeep Wrangler without using the brake pedal, follow these steps:
- Select the oil life submenu on your vehicle’s gauge display.
- Push and hold the OK button until the gauge resets to 100%. This may take a few seconds.
- Once the gauge indicates 100%, release the OK button.
Congratulations! You have successfully reset the oil life on your Jeep Wrangler.
Remember to perform regular oil changes to maintain the health of your vehicle.
- It’s important to consult your vehicle’s manual for specific instructions on resetting the oil life.
Note: The brake pedal is not required for this process.
5. Method 2: Resetting Without The Brake Pedal
If the first method doesn’t work or you prefer an alternative approach, you have the option to reset the oil life on your Jeep Wrangler without utilizing the brake pedal. Follow the steps below to perform this method:
- Locate the “MENU” button on your dashboard.
- Press and hold the “MENU” button until the display shows “RESET OIL LIFE.”
- Use the arrow buttons to navigate to the “RESET OIL LIFE” option.
- Press and hold the “OK” button to confirm the selection.
- The display will show a confirmation message that the oil life has been reset.
Remember, always refer to your vehicle’s manual for detailed instructions specific to your model of Jeep Wrangler.
- If the first method fails or you prefer an alternative option, follow these steps to reset the oil life on your Jeep Wrangler without the brake pedal.
- Locate and press the “MENU” button on your dashboard.
- Hold the “MENU” button until the display shows “RESET OIL LIFE.”
- Use the arrow buttons to select the “RESET OIL LIFE” option.
- Press and hold the “OK” button to confirm.
- Look for the confirmation message on the display indicating that the oil life has been reset.
It is important to consult your vehicle’s manual for model-specific instructions and guidance.
6. Step 1: Press And Release The Engine Start/Stop Button
Just like in the previous method, make sure your Jeep Wrangler is turned off. Without pushing the brake pedal, push and release the ENGINE START/STOP button to turn the ignition to the ON/RUN position. Remember not to start the engine.
7. Step 2: Fully Press The Accelerator Pedal
Once the ignition is in the ON/RUN position, fully press the accelerator pedal, slowly, three times within ten seconds. Make sure to press the pedal all the way down and release it slowly. This is a crucial step in the reset process.
- Step 1: Turn the ignition to the ON/RUN position.
- Step 2: Fully press the accelerator pedal slowly three times within ten seconds.
- Step 3: Make sure to press the pedal all the way down and release it slowly.
- This process is crucial for resetting the system.
Remember: Follow these steps precisely to ensure successful reset.
8. Step 3: Return The Ignition To The Off/Lock Position
After fully pressing the accelerator pedal three times, without pushing the brake pedal, push and release the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position. This action completes the reset procedure.
Remember, if the oil change indicator system did not reset successfully, the indicator message may illuminate when starting the vehicle. In such cases, simply repeat the procedure until the oil life is reset to 100%.
In conclusion, resetting the oil life on your Jeep Wrangler is a straightforward process that can be done in multiple ways. Whether you choose to reset it without using the brake pedal or prefer the alternative method, following the steps outlined in this guide will help you maintain accurate and up-to-date oil life information for your vehicle.
- Keep in mind that regular oil changes are crucial for the performance and longevity of your Jeep Wrangler, so always stay on top of your oil maintenance schedule.
FAQ
How do you reset the change oil light on a Jeep Wrangler?
To reset the change oil light on a Jeep Wrangler, follow these steps: Ensure the Jeep is in the ON/RUN position without starting the engine by pressing and releasing the ENGINE START/STOP button. While the brake pedal is not pushed, fully press the accelerator pedal three times slowly within ten seconds. Then, push and release the ENGINE START/STOP button without pressing the brake pedal again. By following these instructions, the change oil light should be reset successfully on your Jeep Wrangler.
How do you reset the check engine light on a Jeep Wrangler after oil change?
To reset the check engine light on a Jeep Wrangler after an oil change, begin by turning off the vehicle and opening the hood. Locate the battery and find the negative terminal. Disconnect the negative terminal connector and ensure it is kept away from the terminal for approximately 30 to 60 seconds. Once done, reconnect the negative terminal cable and securely tighten all connections. By following these steps, you can easily reset the check engine light on your Jeep Wrangler after an oil change.
1. What is the recommended procedure for resetting the oil life indicator on a Jeep Wrangler, and are there any specific steps or tools required for the process?
To reset the oil life indicator on a Jeep Wrangler, you should follow these recommended steps. First, turn on the ignition without starting the engine. Next, press the accelerator pedal three times within five seconds. Then, turn off the ignition. Finally, start the engine to ensure the oil life indicator has been reset.
No specific tools are required to reset the oil life indicator on a Jeep Wrangler. However, it is essential to consult the vehicle’s manual for accurate and specific instructions as different models may have slightly different procedures.
2. Can the oil life indicator on a Jeep Wrangler be reset manually, or is it necessary to use a diagnostic tool or visit a dealership for the reset?
The oil life indicator on a Jeep Wrangler can be reset manually without the need for a diagnostic tool or visiting a dealership. To reset the indicator, you can usually follow a specific sequence of steps outlined in the vehicle’s owner’s manual. Typically, this involves turning the ignition on without starting the engine, pressing and holding the reset button until the indicator resets, and then turning off the ignition. It’s important to consult the owner’s manual for accurate instructions specific to the Jeep Wrangler model you own.
